What are the tips for using laser cutting machine?
Jan 03, 2022
1. The protective lens inside the laser cutting head is checked daily. When the collimator or focusing lens needs to be disassembled, record the disassembly process, pay special attention to the installation direction of the lens, and do not install the wrong lens.
2. Before turning on the power of the water chiller, check the water level of the water chiller. It is strictly forbidden to turn on the water chiller when there is no water or the water level is too low to avoid damage to the water cooling equipment. It is strictly forbidden to squeeze or step on the water inlet and outlet pipes of the water cooler to keep the waterway unblocked.
3. The operator of the laser processing machine or the person approaching the laser during laser use should wear appropriate laser protective glasses and protective clothing. In the area wearing protective glasses, there must be good indoor lighting for operation The operation was smooth.
4. When using gas cylinders, avoid crushing wires, water pipes and air pipes to avoid leakage of electricity, water and air. The use and transportation of gas cylinders shall comply with gas cylinder supervision regulations. It is forbidden to explode the gas cylinder in the sun or close to a heat source. When opening the bottle valve, the operator must stand on the side of the bottle mouth.
