Trouble And Elimination Of Spiral Duct Machine
Mar 28, 2023
The touch screen of the spiral duct machine displays the hydraulic overload alarm and flashesMethod: Check whether the pressure of the hydraulic station system of the spiral duct machine is too high, remove the electrical box cover of the spiral duct machine, and manually reset the thermal relay.When stamping small holes, the spiral duct machine does not lift the knife.Practice: The solenoid valve of the spiral duct machine may be blocked by debris, so the roller-scissor spiral duct machine can be cleaned.The spiral duct machine does not stop discharging or discharging.Practice: Check whether the photoelectric switch of the spiral duct rack is damaged, or the connecting wire is disconnected, check and replace.After the spiral duct machine was put into operation, the size of the plate was unstable.
