Home / Products / Auto Duct Production Line / Content

Products

Auto Duct Line 5

During feeding mechanism with pneumatic servo, the manipulator helps to ensure the stability and speed of the machine, as well as the accuracy of its positioning system.

Send Inquiry

Fast Delievery
Quality Assurance
24/7 Customer Service

Product Introduction

AUTOMATIC LINE SBAL-V-1250U

image001_

Technical Data:

Type	Thickness	Working speed	Width	Capacity	Weight	Dimension
SBAL-V-1550U	0.5-1.2 mm	12 m/min	1550mm	8000 kg/coil	21000kg	14635mm	4954mm	1300mm
SBAL-V-1250U	0.5-1.2 mm	12 m/min	1250mm	8000 kg/coil	16000kg	14132mm	4600mm	1326mm

Features

1. During feeding mechanism with pneumatic servo, the manipulator helps to ensure the stability and speed of the machine, as well as the accuracy of its positioning system.

2. It only takes 18-25 seconds to make an L-shaped workpiece, which is twice as efficient as the linear type.

3. There is no need to move the fixed locking machine back and forth to improve efficiency.

4. All rollers are made of bearing steel, and the service life is extended by more than 5 times.

5. In the material saving mode of the CNC system, each roll of waste is less than 20 mm.

6. With production memory function, production orders can be tracked and checked.

Basic Configuration

1. One Decoiler (4 coils, 8T each roll, Gear drive)

2. One host (Line III host)

3. Two stainless steel roller convey platforms

4. One fixed joint locking machine

5. One duplex TDF flange forming machine

6. One duplex angle steel flange forming machine

7. One servo feeding platform

8. One hydraulic folding machine

9. One set of computer controlling system

Funtion

Technical Data

Type	Thickness	Working speed	Width	Capacity	Weight	Dimension
SBAL-V-1550U	0.5-1.2 mm	12 m/min	1550mm	8000 kg/coil	21000kg	14635mm	4954mm	1300mm
SBAL-V-1250U	0.5-1.2 mm	12 m/min	1250mm	8000 kg/coil	16000kg	14132mm	4600mm	1326mm